Factory Wholesale ASTM A335 P9 Alloy Steel Pipe - 34CrMo4 /35CrMo Seamless Steel Pipe For Gas Cylinder Pipe – Haihui
Short Description:
Factory Wholesale ASTM A335 P9 Alloy Steel Pipe - 34CrMo4 /35CrMo Seamless Steel Pipe For Gas Cylinder Pipe – Haihui Detail:
34CrMo4 / 35CrMo is used as important structural parts working under high load, such as transmission parts of vehicles and engines; The rotor, main shaft and transmission shaft with heavy load of turbo generator, the large section part 34CrMo4 is used to manufacture forgings with higher strength and larger quenching and tempering section than 35CrMo steel, such as large gear for locomotive traction, booster transmission gear, rear shaft, connecting rod and spring clamp with great load. 34CrMo4 can also be used for drill pipe joints and fishing tools in oil deep wells below 2000m.34CrMo4 Gas Cylinder Pipe, mainly used in automobile gas cylinder installation, fire protection, medical fields, industry equipment, etc.
The carbon equivalent value CEQ of 35CrMo steel is 0.72%. It can be seen that the weldability of this material is poor, and its hard tendency is large during welding. The hot crack and cold crack tendency of the heat affected zone of 35CrMo alloy pipe will be large. Especially when welding in the quenched and tempered state, the cold crack tendency of the heat affected zone will be very prominent. Therefore, on the basis of selecting appropriate welding materials and reasonable welding methods, higher pre welding preheating temperature Under the condition of strict process measures and proper interpass temperature control, the purpose of product welding can be achieved.
-EN 10297-1 Seamless Circular Steel Tubes for Mechanical and General Engineering Purpose.
-GB/T 8162 Seamless Steel Tubes for Structural Purposes.
| Steel Grade | C | Si | Mn | P | S | Cr | Mo |
| 34CrMo4 | 0.30-0.37 | 0.40 max | 0.60-0.90 | 0.035 max | 0.035 max | 0.90-1.20 | 0.15-0.30 |
| Steel Grade | C | Si | Mn | P | S | Cr | Mo |
| 35CrMo | 0.32-0.40 | 0.17-0.37 | 0.40-0.70 | 0.035 max | 0.035 max | 0.80-1.10 | 0.15-0.25 |
Standards: GB18248 – 2000;
OD: Φ50-325mm; wall thickness: 3-55mm;
OD tolerance: ±0.75%;
Wall margin: -10%—+12.5%
Transverse slope: ≤2mm;
Straightness: 1mm/1m;
Inside diameter roundness: no more than 80% of the OD diameter tolerance.
Surface quality: without crack, folding, delamination and stammer.
Product Categories: Seamless steel tubes for high pressure vessels.
Usages: For all kinds of fuel, hydraulic, trailer, station with gas bottle.
Steel Grade: 34CrMo4、30CrMo、34Mn2V、35CrMo、37Mn、16Mn.
Product detail pictures:
Related Product Guide:
We've been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Factory Wholesale ASTM A335 P9 Alloy Steel Pipe - 34CrMo4 /35CrMo Seamless Steel Pipe For Gas Cylinder Pipe – Haihui, The product will supply to all over the world, such as: Sevilla, Romania, Comoros, If you need any of our products, or have other items to be produced, please send us your inquiries, samples or detailed drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
By Merry from Munich - 2018.11.11 19:52
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Polly from Tunisia - 2018.12.22 12:52
