35CrMo Alloy Steel Pipe Steel Pipe Tube
Short Description:
34CrMo4/35CrMo has high endurance strength and creep strength at high temperature, good impact toughness at low temperature, good hardenability, no overheating tendency, small quenching deformation, acceptable plasticity at cold edge forming and medium processability. Poor weldability, preheating before welding, post welding heat treatment and stress relief are generally used after quenching and tempering, and can also be used after high and medium frequency surface quenching or quenching and low and medium temperature tempering.
Which has a complete scientific excellent management technique, excellent quality and very good religion, we earn good name and occupied this field for 35CrMo Alloy Steel Pipe Steel Pipe Tube, We have deep cooperation with hundreds of factories around China. The products we provide can match with your different demands. Choose us, and we won’t make you regret!
Which has a complete scientific excellent management technique, excellent quality and very good religion, we earn good name and occupied this field for China 35CrMo Alloy Steel Pipe, We set a strict quality control system. We’ve got return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our solutions. Be sure to feel free to contact us for further information if you have any questions. We’ve been glad to work for every client.
34CrMo4 / 35CrMo is used as important structural parts working under high load, such as transmission parts of vehicles and engines; The rotor, main shaft and transmission shaft with heavy load of turbo generator, the large section part 34CrMo4 is used to manufacture forgings with higher strength and larger quenching and tempering section than 35CrMo steel, such as large gear for locomotive traction, booster transmission gear, rear shaft, connecting rod and spring clamp with great load. 34CrMo4 can also be used for drill pipe joints and fishing tools in oil deep wells below 2000m.34CrMo4 Gas Cylinder Pipe, mainly used in automobile gas cylinder installation, fire protection, medical fields, industry equipment, etc.
The carbon equivalent value CEQ of 35CrMo steel is 0.72%. It can be seen that the weldability of this material is poor, and its hard tendency is large during welding. The hot crack and cold crack tendency of the heat affected zone of 35CrMo alloy pipe will be large. Especially when welding in the quenched and tempered state, the cold crack tendency of the heat affected zone will be very prominent. Therefore, on the basis of selecting appropriate welding materials and reasonable welding methods, higher pre welding preheating temperature Under the condition of strict process measures and proper interpass temperature control, the purpose of product welding can be achieved.
-EN 10297-1 Seamless Circular Steel Tubes for Mechanical and General Engineering Purpose.
-GB/T 8162 Seamless Steel Tubes for Structural Purposes.
| Steel Grade | C | Si | Mn | P | S | Cr | Mo |
| 34CrMo4 | 0.30-0.37 | 0.40 max | 0.60-0.90 | 0.035 max | 0.035 max | 0.90-1.20 | 0.15-0.30 |
| Steel Grade | C | Si | Mn | P | S | Cr | Mo |
| 35CrMo | 0.32-0.40 | 0.17-0.37 | 0.40-0.70 | 0.035 max | 0.035 max | 0.80-1.10 | 0.15-0.25 |
Standards: GB18248 – 2000;
OD: Φ50-325mm; wall thickness: 3-55mm;
OD tolerance: ±0.75%;
Wall margin: -10%—+12.5%
Transverse slope: ≤2mm;
Straightness: 1mm/1m;
Inside diameter roundness: no more than 80% of the OD diameter tolerance.
Surface quality: without crack, folding, delamination and stammer.
Product Categories: Seamless steel tubes for high pressure vessels.
Usages: For all kinds of fuel, hydraulic, trailer, station with gas bottle.
Steel Grade: 34CrMo4、30CrMo、34Mn2V、35CrMo、37Mn、16Mn.Which has a complete scientific excellent management technique, excellent quality and very good religion, we earn good name and occupied this field for Cheapest Factory 35CrMo Alloy Steel Pipe, We have deep cooperation with hundreds of factories around China. The products we provide can match with your different demands. Choose us, and we won’t make you regret!
Cheapest Factory China Precision Steel Pipe and Precision Seamless Steel Pipe, We set a strict quality control system. We’ve got return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our solutions. Be sure to feel free to contact us for further information if you have any questions. We’ve been glad to work for every client.
If have any inquiry about 35CrMo alloy seamless steel pipe ,please kindly send me details to email:bruce@haihuisteel.com or 0086-15865769231(whatsapp),we would like to provide our best price as soon as possible.We also can provide steel pipe cutting service according to your demands.
Welcome to visit our company ,Hope to cooperate with your esteemed company !
